Search This Blog

Friday 1 October 2010

Poor Terminal Server Performance and Event Log 11728

I have had several Terminal Servers that have displayed poor performance including CPU spikes, application faults and slow printing. All have shown the MSIEXEC event ID 11728 in the Event Log. This is related to a HP Printer Driver that causes a fault if the user is a non admin, which will be all your Terminal Server Users!

HP do have an official line on this below.

HP UPD/Discrete LaserJet Driver - Microsoft Windows Event Viewer (Application) Message "HP CIO Components Installer" - hpzbdi32.msi / hpzbdi64.msi / hpzbdi.dll
Issue
Several reports of HP Bidirectional Channel components (hpzbdi32.msi /hpzbdi.dll , or hpzbdi64.msi /hpzbdi.dll ) could be the potential cause of various performance-related issues within standalone print servers, Microsoft Windows Cluster Server, Citrix, and/or Terminal Server environments, resulting in delays during driver installation, intermittent print spooler crashes, performance issues, CPU spikes, and so forth. CIO MSI does not get installed if a user with non-admin rights attempts to install the driver. The driver will attempt to install the MSI multiple times (five times, with an interval of two minutes between each try) without checking the access permission. This multiple execution causes a delay with the installation, and will launch multiple instances of the MSI installer, which can contribute to the cause of poor performance on the server.
The Microsoft Windows Event log (Application) will usually indicate a reference to: 32 Bit HP CIO Components Installer or a 64 Bit HP CIO Components Installer Product Version: X.X.X. Product Language: XXXX .
This issue may manifest itself with the discrete PCL 6, PCL 5, and Postscript drivers, which are bundled with hpzbdiXX.msi /.dll components. As hpzbdi is considered a legacy bi-directional component, there will not be any further updates or developments to this component. The workarounds that follow have been reported to resolve the majority of issues concerning hpzbdi.msi /.dll reports.
Product/Driver Packages Affected:
The following products have hpzbdi components installed as part of their driver package, and would qualify for the following workarounds:
• HP LaserJet 4250/4350 Printer Series
• HP LaserJet 9040/9050 Printer Series
• HP LaserJet 5200 Printer Series
• HP LaserJet P3005 Printer Series
Solution
The latest versions of hpzbdi.dll , which are not publically available at www.hp.com, and can only be procured by contacting HP Support, are as follows:
• 32-Bit: hpzbdi.dll (1.1.2.51)
• 64-Bit: hpzbdi.dll (1.2.2.51)
When the driver components are installed, the hpzbdi components are installed to the following paths by default:
• 32-Bit: C:\WINDOWS\system32\spool\drivers\w32x86\3
• 64-Bit: C:\WINDOWS\system32\spool\drivers\x64\3
NOTE: The hpzbdi files may also reside in additional folders named hewlett_packardhp_xxxxxx within the w32x86/x64 directories. It is not necessary to make changes to the hpzbdi files located in these directories, per the workaround instructions that follow.
Recommended Solution:
It is recommended to perform a clean installation/upgrade to the HP Universal Print Driver version 4.7.2, as it resolves the issue reported in this document. It should be noted that the HP Universal Print Driver PCL 6, PCL 5, and Postscript version 4.7.2 are not available at www.hp.com. Although this is a fully Microsoft certified driver, which has been through the Microsoft Windows Hardware Quality Labs (WHQL) certification, it is only available from HP Support.
NOTE: Click here to review additional information related to UPD installation/migration at www.hp.com/go/UPD.
It is possible a UPD upgrade to version 4.7.2 is not a viable option, due to logistics beyond the immediate control of the customer. Should this be the case, alternative steps can be taken to address this issue.
Workaround #1:
Zero-byte the MSI Installer Package, which will eliminate the symptomatic behaviors of the issue noted in this document. Complete the following steps:
1. Open Notepad and save the file as hpzbdi32.msi or hpzbdi64.msi . This zero-byte file will not contain any data.
2. Navigate to the %WINDOWS%\system32\spool\drivers\w32x86 (32-bit operating system) or %WINDOWS%\system32\spool\drivers\x64\3 (64-bit operating system) directory, and locate the hpzbdi32.msi or hpzbdi64.msi file. Rename the file to hpzbdi32.old or hpzbdi64.old .
3. Copy and paste the newly created zero-byte file named hpzbdi32.msi or hpzbdi64.msi into the %WINDOWS%\system32\spool\drivers\w32x86 or x64\3 directory.
4. Verify functionality.
NOTE: Depending on configuration, it may be necessary to stop the spooler, perform the steps noted, and then restart the spooler.
Workaround #2:
Complete the following steps:
1. Working with HP Support, obtain the hpzbdi hotfix , which contains either the 32-bit: hpzbdi.dll version 1.1.2.51 and/or 64-bit: hpzbdi.dll version 1.2.2.51.
2. Navigate to the %windows%\system32\spool\drivers\w32x86\3 directory for 32-bit operating systems, and rename hpzbdi.dll to hpzbdi.old .
3. Copy and paste the hpzbdi.dll version 1.1.2.51 hotfix to this working directory.
NOTE: For 64-bit systems, navigate to %windows%\system32\spool\drivers\x64\3 . For step 3 copy and paste the hpzbdi.dll version 1.2.2.51 hotfix to this working directory.
4. Verify functionality.
NOTE: Depending on configuration, it may be necessary to stop the spooler, perform the steps noted, and then restart the spooler.
How to Obtain Support for this Issue:
Customers: If you require the hpzbdi hotfix , as outlined in this document, please contact 1-800-HPINVENT and report the issue to the HP Support agent. Request the hpzbdi hotfix and refer to this document.
HP Support: If an HP customer contacts you to report this issue, and to request the hpzbdi hotfix , please contact your Resource team for immediate consultative action.

No comments:

Post a Comment